Model 6320/PA

The Next Generation of Performance Analyzer

Key Features

• On-machine Analysis Collecting and Displaying Real-time Data
• Large Mass Data Storage for Performance Data and Reports on the Analyzer
• 4-Channel Data Acquisition plus Encoder Channel
• Wireless Encoder and Once- per-turn Inputs
• Historical Data Recall and Graphical Overlays
• High Resolution Color Screen
• Lightweight (5.25 lbs)
• Compact (10.5” x 8.5” x 2” deep)
• Easy-to-use Menu-driven Interface
• Upgradeable Design
• Linux Operating System
• 16bit A/D
• Proprietary “Leak Index” for automated compressor diagnostics
• Velocity sensor for low frequency vibration measurements
• Enhanced backlight/color display for outdoor viewing

6320/PA

Utilizing Windrock’s experience in portable data collectors, miniaturization, and digital signal processing, the 6320/PA boosts productivity and effectiveness by providing the user with the most comprehensive “on machine” analysis capability in the industry.  The 6310/PA combines a four-channel, lightweight, battery operated data collector with a powerful, on-board processor, 4 DSP processors, and internal mass storage.  This allows the user virtual “real-time” display and capture of up to four channels of data simultaneously and the ability to recall historical and baseline data from memory.  The large, color, backlit, high-resolution LCD provides the capability to overlay plots for comparison analysis and trending.  The 6320/PA also calculates performance parameters such as IHP, valve losses, clearances, rod load, capacity, and much more.  With extensive spectrum vibration capabilities, the user can perform four-channel (four-channel /VA transient option available) time waveform and FFT analysis on rotating machinery.  Discover how the 6320/PA can improve the performance, mechanical condition, and reliability of your reciprocating engines and compressors.

Data Acquisition

• 4-Channel simultaneous data acquisition plus encoder or once-per-turn input
• DC to 50 KHz dynamic sampling rate
• 1 MHz ignition sampling rate
• Wireless encoder and once-per-turn

Real-Time "On Machine"

• Pressure vs. Crank Angle
• Vibration vs. Crank Angle
• Ultrasonic vs. Crank Angle
• Spark Voltage vs. Crank Angle
• Detailed “Scope-like” Ignition Trace
• Pressure vs. Volume
• Log Pressure vs. Log Volume
• Historical Data Recall
• Graphical Overlay Plots
• Theoretical Overlay Plots
• Ignition Performance Reports and Calculations
• Engine Performance Reports and Calculations
• Compressor Performance Reports and Calculations
• Non-encoder Peak Pressure Balancer Mode
• Automated Secondary Ignition Survey Mode
• Vibration vs. Time
• FFT of Vibration / FFT Averaging
• Time Synchronous Averaging
• Time Waveform
• O-scope Mode
• Optional 4-channel Transient  Analysis

Engine

• Ignition System Deficiencies
• Peak Firing Pressure Imbalance
• Defective Fuel Injection Valves
• Leaking Valves and Rings
• Worn or Scored Liners
• Intake / Exhaust Port or Bridge Wear
• Worn or Defective Valve Train Components
• Damaged Connecting Rod and Wrist Pins
• Damaged Bearings
• Turbocharger Defects
• Jacket Water and Lube Oil Pump Faults
• Excessive Frame Vibration
• Foundation or Grout Damage
• Horsepower Discrepancies
• Poor Fuel Consumption Factors
• Excessive Exhaust Emission Factors

Compressor

• Mechanical Looseness
              • Piston and Nut
              • Cross Head
              • Pin and Bushing
  
• Leaking Valves and Rings
  
• Cylinder and Piping Pulsations
  
• Passage Flow Restrictions
  
• Defective Unloaders
  
• Excessive Rod Loading
  
• Inadequate Rod Reversal
  
• Defective Rider Bands and Liner Wear
  
• Excessive Valve Losses and Deficiencies
  
• Clearance Discrepancies
  
• Horsepower and Capacity Variances

Applications

• Engine-driven Compressors
  
• Motor-driven Compressors
  
• Diesel-driven Generators and Pumps
  
• Spark-ignited Engines
  
• Diesel Engines in Locomotive and Marine Industries
  
• Rotating Auxiliary Components

Windows Software

Windows-based software is provided to easily setup the machinery database for data storage, historical archiving, and trending.  Comprehensive statistical reports with graphical displays are accessible on the analyzer.

Database Management

• Accommodates up to 200 Stations
  
• Include up to 200 Machines per Station
  
• Win6320/PA Windows software allows easy machine duplication and sharing via e-mail

** Would you like more information on Windrock Products? Fill out our easy Product Inquiry Form.